1. Installation Preparation
- A USB drive with PE installed
On MacOS, you can use balenaEtcher to burn the wepe for mac image.
- Download the synoboot file
http://down.nas2x.com/synology/dsm/6.2/synoboot/
- Download the DSM.pat file
https://archive.synology.com/download/Os/DSM
2. Getting Started
Boot through PE and enter the system
Write synoboot to the built-in SSD storage
If you boot from a USB drive, you may also need to modify the PID and VID values in grup.cfg.
Unplug the USB drive, restart the system, and enter the Happy hacking page
Access http://find.synology.com/ from another computer on the same network
Choose to upload the DSM.pat file to install and wait for the installation to finish
Check the IP address of the DSM host through the router; by default, access the DSM system at http://IP:5000
Set the password, initialize the disk, and enjoy it
